Feature-rich Tools for Debugging Mixed Signal Designs
With the MSO/DPO5000 Mixed
Signal Oscilloscope Series, you can analyze up to 20 analog and digital
signals with a single instrument to quickly find and diagnose problems
in complex designs. Bandwidths up to 2 GHz and sample rates up to 10
GS/s ensure you have the performance you need to see fast-changing
signal details. To capture long windows of signal activity while
maintaining fine timing resolution, the MSO/DPO5000 Series offers a deep
record length of up to 12.5M points standard on all channels and an
optional record length of up to 250M points on two channels.
With Wave Inspector® controls for rapid waveform navigation, and more
than 10 optional software and analysis packages for common technologies
and in-depth analysis tasks, the MSO/DPO5000 Series from Tektronix
provides the feature-rich tools you need to simplify and speed debug of
your complex design.
Windows 7 based operating system plus Touch Screen
The MSO/DPO5000 Series use a 64bit Windows 7
operating system with removeable hard disk. The large XGA
resolution TFT display has a touch screen for fast intuitive operation.
Comprehensive Features Speed Every Stage of Debug
The MSO/DPO5000 Series offers a robust set of
features to speed every stage of debugging your design – from quickly
discovering an anomaly and capturing it, to searching your waveform
record for the event and analyzing its characteristics and your device’s
behavior.
Wave Inspector® Navigation and Advanced Search and Mark
TA 12.5M point standard record length represents
thousands of screens of information. The MSO/DPO5000 Series enables you
to find your event in seconds with Wave Inspector, the industry’s best
tool for navigation and search. Optional 250M point record length
is available.
Digital Phosphor Technology
The MSO/DPO5000 Series’ digital phosphor
technology provides you with fast insight into the real operation of
your device. Its fast waveform capture rate – greater than 250,000 wfm/s
– gives you a high probability of quickly seeing the infrequent problems
common in digital systems: runt pulses, glitches, timing issues, and
more.
Waveforms are superimposed with one another and
waveform points are color coded by frequency of occurrence. This quickly
highlights the events that occur more often over time or, in the case of
infrequent anomalies, occur less often.
With the MSO/DPO5000 Series, you can choose
infinite persistence or variable persistence, determining how long the
previous waveform acquisitions stay on-screen. This allows you to
determine how often an anomaly is occurring.
Accurate High-speed Probing
The TPP Series probes, included standard with
every MSO/DPO5000 Series oscilloscope, provide up to 1 GHz of analog
bandwidth, and less than 4 pF of capacitive loading.
The extremely low-capacitive loading minimizes
adverse affects on your circuits and is more forgiving of longer ground
leads. And with the probe’s wide bandwidth, you can see the
high-frequency components in your signal, which is critical for
high-speed applications.
The TPP Series passive voltage probes offer all
the benefits of general-purpose probes like high dynamic range, flexible
connection options, and robust mechanical design, while providing the
performance of active probes.
Mixed Signal Design and Analysis (MSO Series)
The MSO5000 Series mixed-signal oscilloscopes
provide 16 digital channels. These channels are tightly integrated into
the oscilloscope’s user interface, simplifying operation and making it
possible to solve mixed-signal issues easily. Plus, you can upgrade a
DSO5000 to have MSO capabilities at any time with the MSOE upgrade kit.
Bus Display.
Provides a higher level combined view of the individual signals that
make up your bus, making it easy to identify where packets begin and end
and identifying sub-packet components including address, data,
identifier, and CRC.
Serial Triggering.
Trigger on packet content such as start of packet, specific addresses,
specific data content, and unique identifiers on popular low-speed
serial interfaces.
Bus Decoding.
Tired of having to visually inspect the
waveform to count clocks, determine if each bit is a 1 or a 0, combine
bits into bytes and determine the hex value? Let the oscilloscope do it
for you! Once you’ve set up a bus, the oscilloscope will decode each
packet on the bus, and display the value in either hex or binary in the
bus waveform.
Packet Decode Table.
In addition to seeing decoded packet data on the bus waveform itself,
you can view all captured packets in a tabular view much like you would
see on a logic analyzer. Packets are listed consecutively with columns
for each component.
Search.
Serial triggering is very useful for isolating the event of interest.
With the DPO4000B Series, you can search through the acquired data for
user-defined criteria including serial packet content. Each occurrence
is highlighted by a search mark. Rapid navigation between marks is as
simple as pressing the Prev and Next buttons on the front panel.
Included Accessories
All models include:
One passive voltage probe per analog channel (TPP0500 500 MHz, 10X, 3.9
pF for 500 MHz and 350 MHz models; TPP1000 1 GHz, 10X, 3.9 pF for 1 GHz
and 2GHz
models), Front Cover, Touch screen stylus, Accessory Pouch, User Manual Documentation CD, OpenChoice® Desktop
Software, NI LabVIEW SignalExpress™ Tektronix Edition Software,
Calibration Certificates, Power Cord,
Accessory Bag. One year warranty.
MSO models also include one P6616 16-channel logic
probe and a logic probe accessory kit. |
