 |
| | The Fluke Handheld Test Tools range is available from TTid in the UK |
 |
        |  |
| |
Fluke 43 Power Quality Analyser - Specifications | |
| |
|
| Power | Line voltage adapter/battery charger included |
| Installed battery | Rechargeable Ni-Cd pack |
| Operating time | 4 hours |
| Charging time | 4 hours |
| Environmental | |
| Temperature | 0°C to 50°C (32°F to 122°F) |
| Environmental | MIL 28800E, Type 3, Class III, Style B |
| Enclosure | IP51 (dust, drip water proof) |
| Mechanical Data | |
| Size: (H x W x D) | 232 x 115 x 50 mm (9.1 x 4.5 x 2 inches) |
| Weight | 1.1 kg (2.5 lbs.) |
| Safety | |
| Surge protection | 6 kV on input A and |
| Floating measurements | 600V rms from any terminal to ground |
| Warranty | 3 years parts and labor on Fluke 43, 1 year on accessories |
| Technical Data | |
| Input Characteristics | |
| Input impedance | 1 MOhm, 20 pF |
| Voltage Rating | 600V rms, CAT III |
| Volt/Amps/Hertz Display | |
| True-rms voltage (ac+dc) | Ranges: 5.000V, 50.00V, 500.0V, 1250V* Accuracy: ±(1% +10 counts) |
| True-rms current (ac + dc) | Ranges: 50.00A, 500.0A, 5.000 kA, 50.00 kA Accuracy: ±(1% +10 counts) |
| Mains frequency | Ranges: 40.0 to 70.0 Hz Accuracy: ±(0.5% +2 counts) |
| Power Display | |
| Watts, VA, VAR | Ranges: 250 W, 2.50 kW, 25.0 kW, 250 kW, 2.50 MW, 250 MW Accuracy: ±(4% +4 counts) |
| Power Factor, PF Displacement Power Factor, DPF | Range: 0.00 to 0.25 Accuracy: Not specified Range: 0.25 to 1.0 Accuracy: ±0.04 |
| Harmonics Display | |
| Voltage | Ranges: 1st to 51st harmonic Accuracy: ±(3% +2 counts) to ±(15% +5 counts) |
| Current | Ranges: 1st to 51st harmonic Accuracy: ±(3% +8 counts) to ±(5% +8 counts) |
| Power | Ranges: 1st to 51st harmonic Accuracy: ±(5% +2 counts) to ±(30% +5 counts) |
| Line frequency | Ranges: 40 Hz to 70 Hz fundamental Accuracy: ±0.25 Hz |
| Phase | Ranges: 2nd to 51st harmonic Accuracy: ±3 ° to ±15 ° |
| K-factor | Ranges: 1.0 to 30.0 Accuracy: ±10% |
| Sags and Swells Recording | |
| Recording times | 4 min to 16 days (selectable) |
| True-rms voltage | Ranges: 5.000V, 50.00V, 500.0V, 1250V* Accuracy: ±(2% +10 counts) |
| True-rms current | Ranges: 50.00A, 500.0A, 5.000 kA, 50.00 kA Accuracy: ±(2% +10 counts) |
| Other Recording | |
| Recording times | 4 min to 16 days (selectable) |
| Parameters | |
| V/A/Hz | Line voltage, current, frequency |
| Power | Watts, VA, VAR, PF, DPF, frequency |
| Harmonics | THD, harmonic voltage, (or current, or power), frequency, % of total, phase |
| Ohms | Ohms, diode, continuity, capacitance |
| Temperature | Temperature |
| Scope | DC voltage, dc current, ac voltage, ac current, frequency, pulse width, phase, duty cycle, peak max, peak min, peak min-max, crest factor |
| Transient Capture | |
| Minimum pulse width | 40 ns |
| Voltage threshold settings | 20%, 50%, 100%, 200% above or below normal voltage |
| Min voltage and max voltage at cursor | Ranges: 10V, 25V, 50V, 125V, 250V, 500V, 1250V Accuracy: ±5% of full scale |
| Inrush Capture | |
| Current ranges | Ranges: 1A, 5A, 10A, 50A, 100A, 500A, 1000A |
| Inrush times | Ranges: 1s, 5s, 10s, 50s, 100s, 5 min |
| Cursor readings, Current at cursor | Ranges: 12.5A, 25A, 50A, 125A, 250A, 500A, 1250A, 2500A, 5 kA Accuracy: ±5% of full scale |
| Time between cursors | Ranges: 4 to 235 pixels (1 pixel = inrush time/250) Accuracy: ±(0.2% + 2 pixels) |
| Scope Display | |
| Time ranges | Ranges: 20 ns/div to 60 s/div |
| Max sampling rate | Ranges: 25 MS/s |
| Bandwidth | Voltage channel [1]: 20 MHz at inputs, 1 MHz with TL24 Leads Current channel [2]: 15 kHz at inputs, 10 kHz with 80i-500s Probe |
| Coupling | AC, DC |
| Vertical sensitivity | Ranges: 5 mV/div to 500V/div |
| Vertical resolution | 8 bit (256 levels) |
| Record length | 512 samples per channel |
| Timebase modes | Normal, roll, single |
| Pre-trigger | Up to 10 divisions |
| Measurements | dc, ac, ac+dc, peak, peak-peak, frequency, duty cycle, phase, pulse width, crest factor |
| Ohms, Diode,Continuity | |
| Ohms | Ranges: 500.0W, 5.000 kW, 50.00 kW, 500.0 kW, 5.000 MW, 30.00 MW Accuracy: ±(0.6% +5 counts) |
| Diode voltage | Accuracy: ±(2% +5 counts) |
| Continuity | Beeper on at < (30W ±5W) |
| Max current | 0.5 mA |
| Capacitance | Ranges: 50.00 nF, 500.0 nF, 5.000 µF, 50.00 µF, 500.0 µF Accuracy: ±(2% +10 counts) |
| Temperature** | Ranges: -100.0 °C to 400.0 °C, -200.0 °F to 800.0 °F Accuracy: ±(0.5% +5 counts) |
| Screen Memories | 10 |
| Optically Isolated RS-232 Interface | To printer: Supports HP LaserJet, DeskJet, Epson FX/LQ and Postscript printers with optional PAC91 Printer Adapter Cable To PC: FlukeView Power Quality Analyzer Software included |
| FlukeView Power Quality Software | Hardware requirements: PC or 100% compatible with Windows 3.1, Windows 95, or Windows NT. Enough RAM for Windows operating system. 4 MB hard drive space. Pointing device (mouse) recommended. |
|
| Thurlby Thandar Instruments Ltd. Glebe Road, Huntingdon, Cambridgeshire PE29 7DR U.K. Tel: 01480 412451 Fax: 01480 450409 Email: info@ttid.co.uk Web: http://www.ttid.co.uk |
