Audio Precision 2700 series Audio Analyser 

available in the UK from TTi

  Audio Precision 2700 Series - Technical Specifications

2700 Series

Audio Test and Measurement System

Unmatched Performance




   

2700 Series 

2700 Series Specifications

Analog THD+N (at 1 kHz)

  • System: -112 dB
Analog Bandwidth
  • Generator: 204 kHz
  • Analyzer: 500 kHz
Serial Digital Audio Interface

Measurements:

    • Interface amplitude histogram
    • Jitter spectrum
    • Interface rate histogram
    • Interface spectrum
    • Jitter waveform
    • Interface bit-width histogram
    • Interface waveform
    • Eye pattern
    • Audible monitoring of jitter and embedded audio

Impairments:

    • Jitter
    • Noise
    • Variable rise/fall time
    • Cable simulation
I/O Flexibility

Formats:

    • AES/EBU per AES3-1992
    • Dual connector AES/EBU
    • SPDIF-EIAJ per IEC-60958
    • Dual connector SPDIF-EIAJ
    • Optical (ToslinkŪ) per IEC-60958
    • General purpose serial
    • General purpose parallel
    • Serial interface to chip via optional PSIA

Inputs:

    • Analog (2 balanced, 2 unbalanced)
    • Digital (2 balanced, 2 unbalanced, 1 optical)
    • Generator trig/gate
    • Ext trigger in
    • Video/TTL ref in
    • AES/EBU ref in
    • Parallel input

Outputs:

    • Analog (2 balanced, 2 unbalanced)
    • Digital (2 balanced, 2 unbalanced, 1 optical)
    • Generator monitor ChA, ChB
    • Generator sync
    • Analyzer signal monitor ChA, ChB, reading
    • Digital signal monitor Ch1, Ch2, reading 1, reading 2
    • AES/EBU ref out
    • Audible monitor (headphone)
    • Trigger out
    • Master clock out
    • Transmit frame sync
    • Receive frame sync
    • Parallel output
    • Aux out
Available generated signals and types
  • Low distortion sine
  • Sine burst
  • Shaped sine burst
  • SMPTE/DIN
  • CCIF/DFD
  • DIM/TIM
  • Special (polarity, monotonicity, J-Test, Walking Ones, Walking Zeros, Constant Value, Random, Pass Through)
  • Noise (Pink, White, Bandpass, Rand)
  • Arbitrary waveform (and multitone)
  • Maximum length sequence (MLS)
  • Square wave
Record length: 4 M (32K FFT)
Resolution of FFT measurements: <1 Hz
 
 For Full Specifications download a  PDF  data sheet.

 

 

 
Get More Information: 

Please contact our sales desk and ask for a full technical data sheet and brochure covering Audio Precision products.
Alternatively use the buttons at the top to download a pdf file of the data sheet, or use the Request Info button to request that one is sent to you.		 Discuss an Application or
Arrange a Demonstration:

Please contact our sales desk and ask to speak to a qualified sales engineer.
They will be pleased to discuss the product and its use in your application.  They can also arrange a  visit to demonstrate the product.		 Place an Order
or get a Quotation:

Please contact our sales desk to get an official quotation or to place an order.
Because of the large number of options available, you may wish to speak to a sales engineer first to ensure the correct configuration.

Thurlby Thandar Instruments Ltd.   Glebe Road, Huntingdon, Cambridgeshire PE29 7DR
Tel: 01480 412451  Fax: 01480 450409  Email: sales@tti.co.uk   Web: http://www.tti.co.uk