- Wide Selection of Output Voltages
Voltage ranges from 0-5 VDC to 0-600VDC;
Current levels from 5A to 450A
- High Power Density
3 kW or 4 kW in a 2U chassis
- Up to 16 bit control resolution
- Flexible Remote Programming Options
- Ethernet / RS-232 or GPIB IEEE-488/ RS-232
- Mult-channel slave interface option
- Five year warranty
The 4 kW power rating is new to the Sorensen
Family of power supplies.
Both the 3 kW and 4 kW models have output voltages from 0-5 VDC to
0-600 VDC and a current range from 0-5A to 0-450A. The output RMS
noise is as low as 10 mV. The output will recover to 1% of its
steady-state voltage within 1 ms for a step load change of 100% to
70% or 70% to 100%. The front panel layout makes the series
extremely easy to use. Control switches include: power on, enable/
standby and local/remote.
Displays and indicators show programmed set
points and operational control status. The programmed voltage,
current and overvoltage set points are displayed with two large 3½
digit LED displays. Operational Status LEDs indicate power on,
shutdown, overtemperature, overvoltage, constant current and voltage
mode status.
Control Status LEDs indicate front panel
lockout, remote control and standby status. IEEE-488.2 control LEDs
indicate error, service request and remote address status.
Download
Brochure |
|
| DLM 3 kW models |
| Model Number |
Volts Max. |
Amps Max. |
| DLM 5-350E |
5 |
350 |
| DLM 8-350E |
8 |
350 |
| DLM16-185E |
16 |
185 |
| DLM 32-95E |
32 |
95 |
| DLM 40-75E |
40 |
75 |
| DLM 60-50E |
60 |
50 |
| DLM 80-37E |
80 |
37 |
| DLM
150-20E |
150 |
20 |
| DLM 300-10E |
300 |
10 |
| DLM 600-5E |
600 |
5 |
| DLM 4 kW models |
| Model Number |
Volts Max. |
Amps Max. |
| DLM 5-450E |
5 |
450 |
| DLM 8-450E |
8 |
450 |
| DLM16-250E |
16 |
250 |
| DLM 32-125E |
32 |
125 |
| DLM 40-100E |
40 |
100 |
| DLM 60-66E |
60 |
66 |
| DLM 80-50E |
80 |
50 |
| DLM
150-26E |
150 |
26 |
| DLM 300-13E |
300 |
13 |
| DLM 600-6.6E |
600 |
6.6 |
|
